1. FortressCraft Evolved
2. handbook-Materials
3. Chinese (Simplified)
4. translate

Minecart Resource Handling

矿车资源处理

Once onto your minecart network, Minecarts will stop at Load and Unload stations, and collect and drop off their carried resources.

一旦进入您的矿车网络，矿车将会在车站（Load and Unload stations）载货卸货。

Advanced Minecart Controls

高级矿车控制

For finer control over your Minecart's movement and ore-carrying, you have a number of tools available for changing behaviour and decision making.

为了更好地控制您的矿车和矿石，您有几样工具可用于改变矿车的行为和决策。

Cargo Lift Controller

货梯控制器

Shaft configuration

竖井配置

Once you have cleared your shaft to your desired depth, you will need to fit RackRails to the edges of it. Thankfully, using modern construction techniques, these don't need any support.

Simply attach a Storage Hopper to the Cargo Lift controller and it will place them automatically.

There is NO limit to the distance that this can be placed, but please note that there is a trade-off between distance and speed.

400-600 metres is ideal, but they can be used at any distance at all.

A minimum distance of around 15 metres is recommended.

For shorter distances, try MatterMovers or Transport Conveyors.

一旦您将竖井挖掘到所需的深度，您将需要将机架轨道（RackRails）安装到其边缘。 幸运的是，使用现代施工技术，这些不需要任何额外支持。

  只需将存储料斗连接到货梯控制器，它将自动布置。

  距离无限制，但请注意，距离和速度不可兼得。

  400-600米是理想的，但它们可以在任何距离上使用。

  建议最小距离约15米。

  对于较短的距离，请尝试物质传送器或传送带。

Deployment

配置

Once your Cargo Lift Controller is reading a suitable distance on the rail deployment, then you are ready to fit a Cargo Lift to it.
Simply open the Cargo Lift Controller UI (default key is 'E') and drag the appropriate Cargo Lift into the slot.
You can remove and upgrade Cargo Lifts, but the Cargo Lift MUST be empty before you can do so.

一旦您的货梯控制器在轨道部署上读取了适当的距离，那么您可将准备好的货梯配给它。
  只需打开货梯控制器UI（默认键为'E'），然后将相应的货梯拖入插槽。
  您可以卸下并升级货梯，但首先货梯必须是空的。

Usage

用法